Keel laying introduction. if you decide to replace all of the wood in the old boat, or if you are building a new boat, the first step is to start off a new bilge; laying the keel plank.. 'my keel has fallen off' - ray's voice on the phone. so he dropped his sails and motored home. he asked me to design a new keel that he could build himself. this article goes through the process of turning a deep keeled boat into a competitive shoal shallow draft boat in a way one builder working by themselves can do.. Designs / plans; a box keel boat; the woodenboat forum is sponsored by woodenboat publications, publisher of woodenboat magazine. the forum is a free service, and much like the "free" content on public radio, we hope you will support woodenboat by subscribing to this fabulous magazine. it really is quite difficult to build an ugly wooden.
Since the lift and angle of attack for the keel are small, sections of the six-series are preferable. the 63 or 65-series may be used, but the thickness ratio should not be too small to keep the drag bucket wide enough for upwind sailing. 12% for the 63 and 15% for the 65-series may be considered as suitable lower limits.. Keel design | keel analysis, sailingaerodynamics, a software package for computing the lift and drag acting on keels, rudders and fins. 3-d aerodynamics design and analysis software also analyzes boat design projects - michael storer wooden boat plans, wooden boat plans - michael storer boat design wooden boat plans for amateur boatbuilders light, elegant, high performance keel, rudder and rig. The purists here might say your boat was never meant to be glassed and should be left as plain wood. if the glass appears to not be part of the original build, this could be the case, and you might consider restoring it to factory wood-bottom condition..
0 komentar:
Posting Komentar